Recently searched
- ${item}
Hot searches
-
${item.word}
Vapes Unboxing
The correct operation method for plugging and unplugging electronic cigarette cartridges
The correct plugging and unplugging operation of e-cigarette cartridges not only affects the service life of the device, but also directly relates to the safety of use and the taste experience. The following are the detailed steps and precautions:
First, preparations before operation
Clean your hands
Avoid oil stains or dust on your hands from contaminating the interface between the bomb and the main unit, which may cause poor contact or oil leakage.
Inspect the equipment
Make sure the main unit is fully charged (it is recommended that the battery level be above 30%) to avoid abnormal identification of the cartridgers due to insufficient battery power.
Check if the cartridges have any oil leakage, carbon deposits or deformation. If any abnormalities are found, replace them with new cartridges.
Second, the correct plugging and unplugging steps
Insert the cartridges
Align the marking
Observe the interface markings between the main unit and the cartridge (such as arrows and protrusions) to ensure that the directions are consistent.
Some brands of cigarette cartridges have a foolproof design at the bottom, which may cause obstruction when inserted in the reverse direction.
Vertical light push
Push the cartridges vertically into the main unit interface to avoid tilting and causing the pins to bend.
Force control: Stop when you hear a "click" sound or feel a slight resistance. There is no need to apply excessive force.
Static activation
After insertion, let it stand for 5 to 10 seconds to allow the cartridge to fully contact the main unit, avoiding "no smoke" or "burnt smell" caused by poor contact.
2. Pull out the cartridges
Vertical light pull
Hold the bottom of the cigarette cartridge with your thumb and index finger, and gently pull it upwards vertically to avoid shaking it left and right.
Taboo: Do not pick at the interface with your nails or pry it with tools to avoid damaging it.
Clean the interface
After pulling it out, use a paper towel or cotton swab to clean the condensate or residual e-liquid at the main unit interface.
Third, maintenance and upkeep
Regular cleaning
Clean the main unit interface with a cotton swab dipped in a small amount of alcohol every week to prevent the e-liquid from crystallizing.
Avoid violent operations
When plugging or unplugging, do not rotate or twist the cartridge to avoid damaging the sealing ring or pins.
Store correctly
Unused e-liquid cartridges should be stored in a cool and dry place to avoid direct sunlight which may cause the e-liquid to deteriorate.
Fourth, advanced skills
Anti-condensation techniques
After inserting the cartridge, tilt the main unit (with the cartridge opening facing down) and let it stand for 10 seconds to allow the condensate to flow back to the bottom of the cartridge.
Extend the lifespan of cigarette cartridges
Avoid continuous use for a long time. After every 10 taps, let it stand for 1 minute to prevent the coil from overheating.
Identify fake cigarette cartridges
The genuine cigarette cartridges are packaged with anti-counterfeiting codes, and the interfaces are finely crafted without any glue overflow or burrs.
Summary: The correct insertion and removal of cigarette cartridgers should follow the principle of "vertical, gentle push, and static placement". Regular cleaning and maintenance can significantly enhance the user experience. If poor contact or oil leakage problems occur frequently, it is recommended to replace the main unit or contact after-sales service for inspection.
Featured collection
View all
${data.dd === undefined ? '00' : data.dd }
Days
:
${data.hh === undefined ? '00' : data.hh }
Hours
:
${data.mm === undefined ? '00' : data.mm }
Minutes
:
${data.ss === undefined ? '00' : data.ss }
Seconds
-
-${data.value}
${function() {
var thumbSwitchName = '';
return (data.product.options || []).map((option, index) => {
const optionName = option.name || '';
const position = `option${index + 1}`;
var isThumbImage = false;
if (data.product.need_variant_image && thumbSwitchName === '') {
const variantNames = [] || [];
for (let i = 0, len = variantNames.length; i < len; i++) {
const name = variantNames[i].toLowerCase();
if (name === optionName.toLowerCase()) {
isThumbImage = true;
thumbSwitchName = name;
}
}
}
const variantType = "button";
const thumbStyle = "image";
const mouseEvent = isThumbImage ? ('single-product-variant-template-1715343156188-' + optionName + '.rerender(data=event);') : '';
return (variantType == 'dropdown' && !isThumbImage) ? `
` : `
`;
}).join('')
}()}
${optionName.toLowerCase()}