Drying up of the cartridents can cause the e-liquid to evaporate, the taste to deteriorate, and even make them unusable. The following are systematic methods to prevent drying out, combining principles with practical operation suggestions to ensure that the cartrituses remain moist for a long time.
The e-liquid evaporates naturally
The aging of the open air passage and sealing ring of the e-liquid cartridge can cause the e-liquid to evaporate slowly.
Key factors: temperature, humidity, and sealing performance.
Environmental factors
High temperature: Accelerates the evaporation of e-liquid (such as in a car during summer or in direct sunlight).
Dry air: Low-humidity environments (such as air-conditioned rooms and heated rooms in winter) accelerate moisture loss.
Usage habits
Long-term non-use has led to the sedimentation of e-liquid and the drying of the atomizing core.
Frequent disassembly and assembly of the cartridges lead to the damage of the sealing property.
Store in a sealed container
Keep the original packaging.
Unopened cartridges should be kept in their original packaging (such as sealed aluminum foil bags or moisture-proof boxes) to avoid direct exposure to the air.
Independent sealed container
Sealed cans/boxes: Use containers with sealing rubber rings (such as Lock&Lock boxes, sealed cans) to store cigarette cartrids and prevent air circulation.
Vacuum bag: Place the cartridge in a vacuum bag, evacuate the air, and then seal it to completely isolate oxygen and moisture.
Dust plug assistance
If the e-liquid cartridge has been opened but not used, a silicone dust stopper can be used to seal the air inlet and the mouthpiece to reduce the evaporation of e-liquid.
2. Environmental control
Temperature management
Suitable temperature: 15℃ to 25℃ (avoid high temperature accelerating evaporation).
Store away from light: Ultraviolet rays may decompose the components of e-liquid. It is recommended to store it in a cool place.
Humidity regulation
Suitable humidity: 40% to 60% (avoid excessive dryness or humidity).
Desiccant assistance: Place a small amount of silica gel desiccant in a sealed container to prevent moisture condensation (but it needs to be replaced regularly).
Stay away from pollution sources
Avoid storing the e-liquid together with volatile items such as perfumes and cleaning agents to prevent chemical contamination.
3. Usage habit optimization
Use regularly
Use it at least 1 to 2 times a week to keep the atomizing core moist and prevent the e-liquid from settling.
Avoid excessive shaking
The e-liquid and atomizing core inside the e-cartridge need to be kept balanced. Excessive shaking may cause leakage or drying up.
Replace aged cartridges in a timely manner
After opening, cigarette cartridges are recommended to be used up within 1 to 2 months (the exact time varies by brand), and long-term storage should be avoided.
4. Anti-drying techniques for special scenarios
Long-term storage (more than one month)
Method: Place the cartridges in a sealed bag combined with a desiccant and store them in the refrigerator's crisper drawer (not the freezer).
Note: After refrigeration, it should be brought back to room temperature before use to prevent condensation water from entering the cartridge.
Travel/outdoor carrying
Method: Use shockproof storage bags and sealed cans to prevent leakage or drying out caused by high temperatures and jolts.
For example, when engaging in outdoor activities in summer, you can put the cigarette bombs in a thermos cup (which does not have a heat preservation function) to reduce the impact of temperature.
Slightly dry (the atomization core is not completely dry)
Method:
Place the e-liquid cartridge vertically and let it stand for 10 to 15 minutes to allow the e-liquid to naturally soak the atomizing core.
Take a few gentle sips (without lighting) to use negative pressure to help the e-liquid flow back.
Note: Avoid violent suction to prevent damage to the atomization core.
Severe drying (the atomization core is completely dry)
Method:
Dip a cotton swab in a small amount of e-liquid (or pure water) and gently apply it to the surface of the atomizer core (only for detachable atomizer cores).
Let it stand for 30 minutes before use.
Note: This method may affect the taste. It is recommended to replace the cartridges with new ones first.
It is completely irreparable.
If the cartridge leaks, has an unpleasant smell or fails to produce smoke, it is recommended to discard it directly to avoid health risks.
Misunderstanding
Misconception 1: Believing that "the better the sealing performance of cigarette cartridgers, the less attention is needed to the storage environment."
Analysis: Even with good sealing, high temperatures will still accelerate the evaporation of e-liquid. It is necessary to control both temperature and humidity simultaneously.
Misconception 2: Wrapping cigarette cartridges in a damp cloth to prevent them from drying out.
Analysis: A wet cloth may cause moisture to seep into the e-cartridges, damaging the circuits or contaminating the e-liquid.
Precautions
Avoid freezing: The e-liquid inside the e-cartridge may crystallize at low temperatures, making it unusable.
Avoid direct sunlight: Ultraviolet rays can break down nicotine and flavoring in e-liquid, affecting the taste.
Regular inspection: Check the sealing performance and remaining quantity of the cartridges every week and deal with problems in a timely manner.
The core principle: sealed isolation + environmental control + regular use. The combination of the three can effectively prevent the cartridgers from drying up.
Best Practice:
Unopened cartrogues: Original packaging + Store in a cool and dry place.
Opened cartridges: Dust stopper + use once a week.
Long-term storage: Vacuum bag + refrigeration (use after returning to room temperature).
By the above methods, the service life of cigarette cartritges can be significantly prolonged, and the taste and performance can be maintained stably.