Recently searched
- ${item}
Hot searches
-
${item.word}
Vapes Unboxing
How to replace e-cigarette cartridges correctly
The correct replacement method of e-cigarette cartridges is directly related to the user experience, device lifespan and safety. The following is a detailed step-by-step guide and precautions:
First, preparations before replacement
Clean the environment
Operate on a clean desktop to prevent dust or hair from entering the cartridge or the main interface.
Inspect the equipment
Host status: Confirm that the battery is fully charged (it is recommended to be above 30%). Low battery may cause abnormal identification of the cartridels.
The condition of the cartridge: Observe whether the cartridge is leaking oil, deformed or has carbon deposits. If any abnormality is found, it needs to be replaced immediately.
Second, the correct replacement steps
Take out the old cigarette cartridges
Method:
Pinch the bottom of the cigarette cartridge with your thumb and index finger and gently pull it upwards vertically.
Taboo: Do not rotate or shake the cartridge left and right to avoid damaging the conductive pins of the main unit interface.
Treatment of residues:
After pulling it out, use a paper towel or cotton swab to clean the condensate or e-liquid at the interface of the main unit to prevent poor contact.
2. Install new cartridges
Align the marking:
Observe the interface markings between the main unit and the cartridge (such as arrows and protrusions) to ensure that the directions are consistent.
Some brands of cigarette cartridges have a foolproof design at the bottom, which may cause obstruction when inserted in the reverse direction.
Vertical gentle push
Push the cartridges vertically into the interface of the main unit to avoid tilting and causing the pins to bend.
Force control: Stop when you hear a "click" sound or feel a slight resistance. There is no need to apply excessive force.
Static activation
After insertion, let it stand for 5 to 10 seconds to allow the cartridge to fully contact the main unit, avoiding "no smoke" or "burnt smell" caused by poor contact.
Third, check after replacement
Functional test
Draw 2 to 3 puffs to confirm that the smoke volume is normal, there is no burnt smell, and the main unit indicator light is working properly.
Oil leakage inspection
Observe whether there are oil stains on the interface of the main unit and the bottom of the cartridges. If there are, immediately remove the cartridges and clean them.
Fourth, Common Problems and Solutions
Oil spill
Cause: Aging of the cartridge sealing ring, too loose insertion or accumulation of condensate.
Solution: Replace the cartridge with a new one and ensure it is inserted properly. If the condensate accumulates, after removing the cartridge, tilt the main unit (with the cartridge opening facing down) for 10 seconds to allow the condensate to flow back.
Poor contact
Cause: Foreign objects in the interface, deformed pins or malfunction of the bomb chip.
Solution: Use a cotton swab dipped in alcohol to clean the interface and check if the pins are bent. If the problem persists, try other cartridges or restart the host.
The taste becomes milder.
Cause: Aging of the cartridges, accumulation of condensate or abnormal power of the main unit.
Solution: Replace the cartridge with a new one and clean the condensate. If the power of the main unit is abnormal, check whether it is due to low battery or equipment failure.
Fifth, maintenance and upkeep
Regular cleaning
Clean the main unit interface with a cotton swab dipped in a small amount of alcohol every week to prevent the e-liquid from crystallizing.
Avoid violent operations
When plugging or unplugging, do not rotate or twist the cartridge to avoid damaging the sealing ring or pins.
Store correctly
Unused e-liquid cartridges should be stored in a cool and dry place to avoid direct sunlight which may cause the e-liquid to deteriorate.
Sixth, advanced skills
Anti-condensation techniques
After inserting the cartridge, tilt the main unit (with the cartridge opening facing down) and let it stand for 10 seconds to allow the condensate to flow back to the bottom of the cartridge.
Extend the lifespan of cigarette cartridges
Avoid continuous use for a long time. After every 10 taps, let it stand for 1 minute to prevent the coil from overheating.
Identify fake cigarette cartridges
The genuine cigarette cartridges are packaged with anti-counterfeiting codes, and the interfaces are finely crafted without any glue overflow or burrs.
Summary: The correct replacement of cartridgers should follow the principle of "vertical, gentle push, and static placement". Regular cleaning and maintenance can significantly enhance the user experience. If poor contact or oil leakage problems occur frequently, it is recommended to replace the main unit or contact after-sales service for inspection.
Featured collection
View all
${data.dd === undefined ? '00' : data.dd }
Days
:
${data.hh === undefined ? '00' : data.hh }
Hours
:
${data.mm === undefined ? '00' : data.mm }
Minutes
:
${data.ss === undefined ? '00' : data.ss }
Seconds
-
-${data.value}
${function() {
var thumbSwitchName = '';
return (data.product.options || []).map((option, index) => {
const optionName = option.name || '';
const position = `option${index + 1}`;
var isThumbImage = false;
if (data.product.need_variant_image && thumbSwitchName === '') {
const variantNames = [] || [];
for (let i = 0, len = variantNames.length; i < len; i++) {
const name = variantNames[i].toLowerCase();
if (name === optionName.toLowerCase()) {
isThumbImage = true;
thumbSwitchName = name;
}
}
}
const variantType = "button";
const thumbStyle = "image";
const mouseEvent = isThumbImage ? ('single-product-variant-template-1715343156188-' + optionName + '.rerender(data=event);') : '';
return (variantType == 'dropdown' && !isThumbImage) ? `
` : `
`;
}).join('')
}()}
${optionName.toLowerCase()}